Important!

Concerning your camera’s waterproof feature

This camera complies with JIS IPX8 (formerly JIS protection grade 8) waterproof standard and can be used in water. Note, however, that failing to heed the following precautions may result in damage or injury that is not covered by the warranty. Please take the time to carefully read and heed the following cautions.

NOTE

k Before using the camera

i When closing the battery cover and terminal cover, make sure that no foreign object such as sand, hair, dust, etc. is caught in the rubber seal.

i Make sure that the battery cover and terminal cover are completely and securely closed to prevent water from getting inside the camera and damaging it.

i Please note that the camera accessories are not waterproof.

k Cautions concerning use in water

i The waterproof properties of the camera apply to fresh water and saltwater only; they do not apply to cleaning substances, chemicals or water from spas, etc. In case of a splash, immediately wipe off any moisture.

i Do not immerse in water at a depth greater than 3.0 m (9.84 ft.).

i Do not subject the camera to high-pressure water. i Do not immerse in water for longer than 60 minutes. After 60 minutes of use in water, allow it to dry for at least 10 minutes.

i Do not immerse in water that is warmer than 40 °C (104°F).

i Do not open and close the battery cover or terminal cover when the camera is wet or while it is immersed in water.

i Do not open and close the battery cover or terminal cover with wet hands. i Do not open the battery cover or terminal cover on the beach or at the

poolside.

i Do not jolt the camera while it is immersed in water. Doing so may cause the battery cover or terminal cover to open.

English xxii

Page 23
Image 23
Sanyo VPC-CA100TA, VPC-CA100GX, VPC-CA100PX, VPC-CA100EX, VPC-CA102 Concerning your camera’s waterproof feature