Sanyo VPC-CA100EX, VPC-CA102 To immediately activate the power save mode, About the standby mode

HINT

To immediately activate the power save mode

i Press the ON/OFF button briefly to activate the power save function.

About the standby mode

i To turn off the camera only briefly, you can close the monitor unit to put the camera in the standby mode. The standby mode uses almost no power. When the monitor unit is opened again, the camera turns on immediately and you are ready to shoot or view images without any delay.

CAUTION

If the K icon appears...

i When a picture is taken, the date and time it was captured are recorded with it. If the date and time settings have not been completed (page 33), the date and time cannot be recorded with the captured images. For this reason, immediately after the camera is turned on, the “Set date and time” reminder briefly appears, after which the K icon is shown on the Recording Screen. To have the date and time recorded with the images, please complete this setting before capturing images.

SETUP

English 32