TV Operations
Recalling a preset station
A total of 12 TV stations can be stored
There are 2 ways available to recall the preset station.
●Using the [R] or [F] button
1.Press the [BAND] button or touch the [Band] key to select the desired TV band. (TV1 or TV2)
2.Press the [R] or [F] button to recall a stored TV station.
●Using the Preset List screen
1.Touch the screen to display the menu, then touch the [List] key.
2.Touch the corresponding Preset key to recall the stored station.
* You can select the desired band by touching the [Band] key.
*Touching and holding the desired Preset key for more than 2 seconds will store the current station into the preset memory.
3.Touch the [List] key again to return to the previous screen.
Manual memory
1.Touch the [Band] key to select the desired TV band. (TV1 or TV2)
2.Tune in the desired TV station to be stored.
3.Touch the [List] key.
4.Touch and hold one of the Preset key for more than 2 seconds to store the current station into the preset memory.
Auto store
Auto store selects 6 TV stations automatically and stores each one into a preset memory. If 6 stations cannot be received with good reception, previously stored station remain and only the strong stations are stored into memory.
1.Touch the [Band] key to select the desired TV band. (TV1 or TV2)
2.Touch the [List] key.
3.Touch and hold the [AS] key for more than 2 seconds.
A beep sounds and the stations with good reception are stored automatically to the preset channels.
Preset scan
Preset scan shows each preset channel before it automatically advances to the next preset. This function is useful for searching for desired TV station in memory.
1.Touch the screen to display the TV/VTR mode menu, then touch the [List] key.
2.Touch the [PS] key to start preset scan. The unit starts scanning each station for 7 seconds sequentially.
3.When the desired channel is received, touch the [PS] key again.
Setting the TV diver
You can change the reception setting for the TV antenna connected to the TV tuner.
*Normally use the TV diver with the “ON” position. 1. Touch the screen to display the TV/VTR mode
menu, then touch the [Option] key.
2.Touch the [ON] or [OFF] key of the TV DIVER item to turn this function on and off.
[ON]:
Sets reception emphasizing the visual. [OFF]:
Sets the diver setting to OFF.
3.Touch the [Back] key to return to the previous mode.
English Owner’s manual
MAX675VDII 53
