Basic Operations
English Owner’s manual
Opening/closing the operation panel
1.Press the [7] (OPEN/CLOSE) button.
The operation panel will be opened or closed.
Note:
•The operation panel will close automatically when leaving it open for a while.
•When the operation panel is open, the touch panel cannot be operated.
Adjusting the AUDIO
Note:
•When the optional 5.1 ch Surround Decoder (DVH940N) is used, the following tone adjustments cannot be made. To adjust the tone, refer to the section “5.1 ch Surround Decoder Operations” (page 59).
1.Press the [ADJ] button, then touch the [AUDIO] key.
2. Touch the item key to adjust.
Adjusting the angle of the operation panel
The angle of the operation panel can be adjusted in the range of 0θ to 30θ.
1.Keep pressing the [7] (OPEN/CLOSE) button more than 2 seconds.
Beeps will sound twice and the operation panel will start moving.
2.When the operation panel is moved to your desired angle, release the button.
The operation panel will stop.
* Once you adjust the angle of the operation panel, the operation panel will return to the adjusted angle even after it is open/closed.
Returning the operation panel to the original angle
1.Keep pressing the [7] (OPEN/CLOSE) button.
It will move, and stop at 30θ.
2.Keep pressing the [7] (OPEN/CLOSE) button again.
It will move, and stop at 0θ.
3.Perform the adjustment.
See the following sections for detail.
4.Touch the [Back] key to return to the previous screen.
* In the following sections, only the details regarding adjustments are described, procedures to select items are skipped.
Adjusting the balance/fader
•The factory default setting is “0”. (Adjustment range: front 12 to rear 12)
[{]:
Emphasizes the sound from the front speakers.
[}]:
Emphasizes the sound from the rear speakers.
•The factory default setting is “0”. (Adjustment range: left 13 to right 13)
[[]:
Emphasizes the sound from the left speakers.
[]]:
Emphasizes the sound from the right speakers.
22 MAX675VDII
