Konica Minolta 211, 163, 181 manual Checking IPP-related settings from PageScope Web Connection

Network printing

3

Reminder

Before specifying settings, check that the following preparations have been completed.

The computer can communicate using the TCP/IP protocol. This machine can communicate using the TCP/IP protocol. The printer driver is installed on the computer.

(For details on installing the PCL driver, refer to “Installing the printer driv- er by using the Add Printer Wizard” on page 2-15.If the GDI driver is to be installed, refer to the User’s Guide for the GDI printer controller, in- cluded with this machine.)

Checking IPP-related settings from PageScope Web Connection

For details on PageScope Web Connection, refer to “Using PageScope Web Connection” on page 11-1.

1

2

3

4

Start up PageScope Web Connection.

Type in the password to log on to the Administrator mode.

–For the password, consult with the network administrator.

Click the Network tab, and then click “IPP Configuration” in the menu.

Make sure that the “Enable IPP” check box is selected. If the check box is not selected, IPP printing cannot be performed.

IC-206 3-19