Network settings
7
3 Type in the administrator access code, and then press the [OK] key.
–The manufacturer’s default setting is “000000”.
–If the code was incorrectly entered, press the [Clear/Stop] key to erase the number, and then type it in correctly.
4 Press the [,] or [+] key until “USER SETTING” is selected, and then press the [OK] key.
5 In the “USER SETTING” menu, press the [,] or [+] key until “NTP SERVER ADDRESS” is selected, and then press the [OK] key.
6 Use the keypad to type in the NTP server address, and then press the [OK] key.
|
