Network printing
3
Parameter | NDS | Bindery |
NetWare Configuration* | Enable NetWare (Select the check box to enable it.) | |
|
| |
Frame Type* | AutoDetect (Select the frame type according to the network en- | |
| vironment.) |
|
|
| |
Print Server Name | Print server name created in step 4 | |
|
|
|
NDS Context Name | Name of the context that con- | Not necessary to specify |
| nects to PServer |
|
|
|
|
Print Server Password | Specify only when setting from the NetWare Server. | |
|
| |
Password Retype | Specify only when setting from the NetWare Server. | |
|
|
|
Preferred File Server | Not necessary to specify | Name of the file server that |
|
| connects to PServer |
|
|
|
Preferred NDS Tree | Name of the tree where Pserv- | Not necessary to specify |
| er logs on |
|
|
|
|
Print Queue Scan Rate* | 1 (Change as necessary.) |
|
|
|
|
Mode* | Nprinter |
|
|
| |
Printer Number | 1 (Change according to the setting.) | |
|
|
|
Connection Mode | Directory Services | Bindry |
|
|
|
After changing the settings for parameters marked with an asterisk (*), turn this machine off, then on again.
Specifying the NetWare 5.x/6 Novell Distributed Print Service (NDPS) settings
Reminder
Before specifying NDS settings, make sure that NDPS Broker and NDPS Manager have been created and loaded.
Check that the NetWare server is set to use the TCP/IP protocol. Specify the IP address for the controller and check that it has started.
