Konica Minolta 181, 211, 163 manual Installing using the Add Printer Wizard on Windows

Installing the printer driver

2

Installing using the Add Printer Wizard on Windows 2000

Note

When using a USB cable to connect this machine to the computer, turn off this machine, and then install the printer driver. When the machine is turned on, Plug and Play causes the Add New Hardware Wizard to ap- pear.

1 After Windows has started, insert the printer driver CD-ROM into the CD-ROM drive of the computer.

2 Click the Windows [Start] button, point to “Settings”, and then click “Printers”.

The Printers window appears.

3 Double-click the “Add Printer” icon.

The Add Printer Wizard starts up.

4

5

Click the [Next] button.

Select “Local printer”, and then click the [Next] button.

–The “Automatically detect and install my Plug and Play printer” check box should be cleared.

–In order to print on a network, the connection port must be set up as a network port. Since the port settings can be specified after in- stallation, this procedure describes how to install the printer driver for a local connection. For details on specifying the port settings, refer to “Connecting the computer and this machine over a net- work” on page 3-15.

IC-206 2-23