Network settings
7
Note
For the authentication method, consult with the network administrator. The manufacturer’s default setting is “ANONYMOUS”.
Specifying the LDAP account name
1 In the “LDAP SETTING” menu, press the [+] or [,] key until “LDAP AC- COUNT” is selected, and then press the [OK] key.
2
3
Type in the account name for the LDAP server.
–The account name can contain a maximum of 64 characters.
–For the account name for the LDAP server, consult with the network administrator.
–If the setting was incorrectly entered, press the [Clear/Stop] key to erase it, and then type it in correctly.
Press the [OK] key.
After the message “ACCEPTED” appears, the “LDAP SETTING” menu appears again.
|
