Performing a Scan to Server (FTP) operation
10
10Performing a Scan to Server (FTP) oper- ation
This chapter provides descriptions of the procedures for sending scan data to servers.
10.1Basic transmission
In order to perform a Scan to Server (FTP) operation, certain settings such as the FTP server address must be specified in advance. These settings can be specified using PageScope Web Connection. For details on PageScope Web Connection, refer to “Using PageScope Web Connection” on
page
In addition, the FTP server address must be registered as a speed dial number. Refer to “Registering speed dial destinations (FTP servers)” on page
Note
Speed dial settings and settings the destination server address for Scan to Server (FTP) operations can only be specified from PageScope Web Connection. These settings cannot be specified from the control panel.
Using the automatic document feeder
1 Press the [Scan] key.
|
