7
Network settings
2 Type in the attribute.
–The attribute can contain a maximum of 32 characters.
–For the attribute, consult with the network administrator.
–If the setting was incorrectly entered, press the [Clear/Stop] key to erase it, and then type it in correctly.
3 Press the [OK] key.
After the message “ACCEPTED” appears, the “LDAP SETTING” menu appears again.
Selecting the search method
1 In the “LDAP SETTING” menu, press the [+] or [,] key until “SEARCH METHOD” is selected, and then press the [OK] key.
2 Press the [+] or [,] key until “BEGIN”, “CONTAIN” or “END” is select- ed, and then press the [OK] key.
–Whether “BEGIN”, “CONTAIN” or “END” is selected, the message “ACCEPTED” appears, and then the “LDAP SETTING” menu ap- pears again.
|
