Performing a Scan to
9
3 Press the [OK] key.
The message “SCANNING” appears, and the following screen appears when scanning is finished.
–When scanning a document that contains multiple pages, position the next page of the document on the original glass, and then press the [OK] key. Repeat this step until all pages of the document are scanned.
4 After all pages of the document are scanned, press the [Start] key.
When transmission is finished, the message “COMPLETE” appears and the Scan mode screen appears again.
Note
To stop scanning, press the [Clear/Stop] key.
If the transmission could not be completed correctly, a transmission re- sult report is printed.
To cancel a queued transmission of scan data, press the [Function] key, and then select “CANCEL RESERV.”. For details, refer to the User’s Guide for fax kit
|
