Network settings
7
Specifying the search base
1 In the “LDAP SETTING” menu, press the [+] or [,] key until “SEARCH BASE” is selected, and then press the [OK] key.
2
3
Specify the database where the LDAP server is searched.
–The search base can contain a maximum of 64 characters.
–For the search base, consult with the network administrator.
–If the setting was incorrectly entered, press the [Clear/Stop] key to erase it, and then type it in correctly.
Press the [OK] key.
After the message “ACCEPTED” appears, the “LDAP SETTING” menu appears again.
Specifying the attribute setting
1 In the “LDAP SETTING” menu, press the [+] or [,] key until “AT- TRIBUTE” is selected, and then press the [OK] key.
|
