Performing a Scan to Server (FTP) operation
10
10.2If the memory becomes full while scanning docu- ments
If the memory becomes nearly full while documents are being scanned, a warning message appears. Select whether to continue the transmission or to cancel it.
After a message appears warning that the memory is nearly full, the “MEM. FULL/TX CANCEL” menu appears.
%Press the [,] or [+] key until “YES” or “NO” is selected, and then press the [OK] key.
–If the memory became full while scanning a document from the original glass, select “NO” when the warning message appears, and then press the [OK] key to begin sending the scanned pages. When the transmission is finished, the message “COMPLETE” ap- pears, and then the Scan mode screen appears again.
–If “YES” is selected and the [OK] key is pressed, the message “AC- CEPTED” appears, and then the Scan mode screen appears again.
–If “NO” is selected and the [OK] key is pressed, the message “*WAIT MEMORY SPACE*” appears, and transmission of the scanned page begins. After the transmission is finished, the scan- ning of the remaining pages begins automatically.
|
