3
Network printing
9 Using the keypad, type in the gateway.
–For the gateway, consult with the network administrator.
–If the number was incorrectly entered, press the [Clear/Stop] key to erase it, and then type it in correctly.
10 Press the [OK] key.
The message “ACCEPTED” appears, and then the “NETWORK SET- TING” menu appears again.
11 Press the [Reset] key in the control panel.
–After the screen shown below appears, turn the machine off, then on again to restart it.
–In order to apply the new settings, the machine must be turned off, then on again to be restarted.
|
