
Network settings
7
Specifying the POP before SMTP setting
1 In the
2 Press the [,] or [+] key until “OFF” or “ON” is selected, and then press the [OK] key.
–If “OFF” is selected, the message “ACCEPTED” appears, and then the
–If “ON” is selected, specify the length of time (in seconds) for POP before SMTP. Specify the number of seconds, and then press the [OK] key. The message “ACCEPTED” appears, and then the “E- MAIL SETTING 1” menu appears again.
–The period can be set between 0 and 60 seconds.
Specifying the E-MAIL MODE settings
%In the
|