![](/images/new-backgrounds/1115375/115375479x1.webp)
Performing a Scan to
9
–If “MANUAL” is selected, a screen appears, allowing you to adjust the density. Press the [*] or [)] key to adjust the density. Adjusting the setting to the left reduces the density (lightens the image). Ad- justing the setting to the right increases the density (darkens the im- age).
When the [OK] key is pressed after the density setting is adjusted, the message “ACCEPTED” appears, and then the Scan mode screen ap- pears again with the adjusted density setting indicated.
Note
The manufacturer’s default setting is “AUTO”.
|