Konica Minolta 181, 211, 163 manual Specifying the e-mail address of the sender

7

Network settings

Specifying the e-mail address of the sender

1 In the “E-MAIL SETTING 1” menu, press the [,] or [+] key until “E-MAIL ADDRESS” is selected, and then press the [OK] key.

2 Type in the e-mail address of the sender.

–The e-mail address can contain a maximum of 64 characters.

–If this machine will not be used to receive e-mail messages, enter the e-mail address of the administrator.

–Be sure to first obtain from the network administrator the e-mail ad- dress to be registered with the machine.

3 Press the [OK] key.

After the message “ACCEPTED” appears, the “E-MAIL SETTING 1” menu appears again.

Note

If a number was incorrectly entered, press the [Clear/Stop] key to erase the number, and then type it in correctly.

7-22 IC-206