Press the [Utility] key.
9
Performing a Scan to
9.5Specifying the default scanning settings
The default settings for the resolution, data format and compression encod- ing method during scanning and transmission with Scan to
Selecting the resolution
1
2 Press the [,] or [+] key until “SCAN SETTING” is selected, and then press the [OK] key.
3 Press the [,] or [+] key until “RESOLUTION” is selected, and then press the [OK] key.
4 Press the [,] or [+] key to select the appropriate resolution from the available settings.
–The settings available for the resolution are “150×150dpi”, “300×300dpi” and “600×600dpi”.
|
