Konica Minolta 181 Connecting the computer and this machine over a network, Peer-to-peer printing

Network printing

3

3.5Connecting the computer and this machine over a network

Specify the settings necessary for connecting the computer and this ma- chine over the network and sending a print job through the network from the computer.

The following connection procedures are described in this section.

-Peer-to-peer printing

–Windows 98 SE/Windows Me - LPR printing

–Windows 2000

-PORT9100 printing

–Windows 2000/Windows XP/Windows Server 2003/Windows Vista - IPP printing

–Windows 2000/Windows XP/Windows Server 2003/Windows Vista - Connecting the NetWare server and this machine

–Specifying the NetWare 4.x/5.x/6 print server mode settings

–Specifying the NetWare 4.x/5.x/6 remote printer mode settings

–Specifying the NetWare 5.x/6 Novell Distributed Print Service (NDPS) set- tings

–Specifying print settings for the NetWare client (Windows)

Peer-to-peer printing

Compatible operating systems: Windows 98 SE/ Windows Me

Reminder

Before specifying settings, check that the following preparations have been completed.

The computer can communicate using the TCP/IP protocol. This machine can communicate using the TCP/IP protocol. The printer driver is installed on the computer.

(For details on installing the PCL driver, refer to “Installing the printer driv- er by using the Add Printer Wizard” on page 2-15.If the GDI driver is to be installed, refer to the User’s Guide for the GDI printer controller, in- cluded with this machine.)

1 On the Start menu, point to “Settings”, and then click “Printers” to open the Printers folder.

2

3

Right-click the icon for the installed printer.

Click “Properties” to open the Properties dialog box.

IC-206 3-15