10
Performing a Scan to Server (FTP) operation
Scanning begins, a connection to the FTP server is established, and uploading of the scan data begins.
Note
To stop scanning, press the [Clear/Stop] key.
If the transmission could not be completed correctly, a transmission re- sult report is printed.
To cancel a queued transmission of scan data, press the [Function] key, and then select “CANCEL RESERV.”. For details, refer to the User’s Guide for fax kit
!
Detail
Only FTP server address registered as speed dial numbers can be spec- ified. FTP server addresses can be registered as speed dial number by using PageScope Web Connection. Refer to “Registering speed dial des- tinations (FTP servers)” on page
A notification of the FTP server address where the data was uploaded can be sent to up to 10 specified recipients.
When registering the speed dial destination with PageScope Web Con- nection, select
|
|
