Konica Minolta 163, 211, 181 manual Specifying the time zone

7

Network settings

–If an NTP server was specified:

The date and time that data is sent with the Scan to E-Mail or Scan to FTP operation are automatically added to the data at the same time that the transmission date and time are recorded in the trans- mission log.

–If an NTP server was not specified:

Only a transmission number is added to data sent with the Scan to E-Mail or Scan to FTP operation; the transmission date and time are not added to the data. In addition, the date and time are not record- ed in the transmission log.

–For the NTP server address, consult with the network administrator.

The message “ACCEPTED” appears, and then the “USER SETTING” menu appears again.

7 Press the [Reset] key.

The time is acquired from the NTP server, and then the time on the ma- chine is set.

Specifying the time zone

1 Press the [Utility] key in the control panel.

2 Press the [,] or [+] key until “ADMIN. MANAGEMENT” is selected, and then press the [OK] key.

7-48 IC-206