7
Network settings
8 Use the keypad to type in the subnet mask, and then press the [OK] key.
–For the subnet mask, consult with the network administrator.
9 Use the keypad to type in the gateway.
10 Press the [OK] key.
After the message “ACCEPTED” appears, the “NETWORK SETTING” menu appears again.
11 Press the [Reset] key in the control panel.
–After the screen shown below appears, turn the machine off, then on again to restart it.
Note
If a number was incorrectly entered, press the [Clear/Stop] key to erase the number, and then type it in correctly.
|
