10

Performing a Scan to Server (FTP) operation

Align the document on the scales above and to the left of the orig- inal glass.

For information on documents that can be used and the scanning area of the image, refer to the User’s Guide included with the ma- chine.

3 Press the [Speed Dial] key, and then use the keypad to type in the 3- digit speed dial number (number programmed with the address of the FTP server where the data is to be uploaded).

When the destination address is entered, “OTHER SETTING=,” appears. To change the transmission settings, such as the subject, cc address or file format, press the [,] key. The “SCAN OTHER SETTING” menu appears. For details on changing the transmission settings, refer to “Changing the transmission settings” on

page 9-10.

Specify a speed dial number between 241 and 250.

If nothing is registered with the specified speed dial number, an er- ror message appears. Enter the correct speed dial number.

If the number was incorrectly entered, press the [Back] key, and then type it in correctly.

4 Press the [OK] key.

The destination appears.

10-6

IC-206

Page 271
Image 271
Konica Minolta 163, 211, 181 manual 10-6 IC-206