JVC RX-8040B manual Connecting Audio/Video Components

English

Connecting Audio/Video Components

When connecting individual components, refer also to the manuals supplied with them.

Analog connections

If your audio components have digital audio output terminal, connecting them using the digital cords explained in “Digital connections” (see page 14).

Audio component connections

Use the cables with RCA pin plugs (not supplied).

•Connect the white plug to the audio left jack, and the red plug to the audio right jack.

If your audio components have a COMPULINK jack

See also page 51 for detailed information about the connection and the COMPULINK remote control system.

CAUTION:

If you connect a sound-enhancing device such as a graphic equalizer between the source components and this receiver, the sound output through this receiver may be distorted.

CD player

CD player

To audio output

CD recorder

Right / Left

R

L CD IN

Turntable

Right / Left

PHONO

CD recorder

To audio input To audio output

Right / Left

R

OUT

(REC)

R

L

Turntable

IN

L

CDR

L

IN

(PLAY)

R

If a ground cable is

provided for your turntable,

connect the cable to the

screw marked (H) on the

rear panel. To audio output

Note:

This connection is for the turntable with an MM (moving-magnet) type cartridge.

Any turntables incorporating a small-output cartridge such as an MC (moving-coil) type must be connected to this receiver through a commercial head amplifier or step-up transformer. Direct connection may result in insufficient volume.

10