JVC RX-8040B manual Activating the EX/ES/PLIIx setting

Activating the EX/ES/PLIIx setting

For multi-channel digital software, you can activate the EX/ES/PLIIx (6.1-channel) reproduction mode.

•Once you have set EX/ES/PLIIx (6.1-channel) reproduction mode, it is stored in memory and will be called up whenever you activate the Surround mode which the memorized EX/ES/PLIIx (6.1-channel) reproduction mode can be applied to.

EX/ES/PLIIx

Press EX/ES/PLIIx to select an appropriate setting for your enjoyment.

The currently selected EX/ES/PLIIx (6.1-channel) reproduction mode appears on the display.

•Each time you press the button, it changes as follows:

For details of applicable Surround mode, see “Surround Modes Applicable to the Various Software” on pages 46 and 47.

EX/ES:AUTO	According to the incoming signal, an
	appropriate Surround mode is applied.
	• For Dolby Digital EX and DTS-ES,
	6.1-channel reproduction is applied.
	• For other multi-channel (more than
	4 channel) encoded software, 5.1-channel
	reproduction is applied.
EX/ES:ON*1	Select to apply 6.1-channel reproduction to
	both 5.1-channel and 6.1-channel encoded
	software.

PLIIx MOVIE*1 *2 Select to apply PLIIx MOVIE (6.1-channel) reproduction to both 5.1-channel and 6.1-channel encoded software.

PLIIx MUSIC*1	Select to apply PLIIx MUSIC (6.1-channel)
	reproduction to both 5.1-channel and
	6.1-channel encoded software.
EX/ES:OFF*3	Select to cancel the EX/ES/PLIIx
	(6.1-channel) reproduction.

*1 When you have set the surround back speakers to “NONE” (see page 34), you can enjoy up to 5.1-channel sounds using the VIRTUAL SB (Surround Back).

*2 When using PLIIx Movie to reproduce Dolby Digital or DTS software, this receiver applies Dolby Digital EX (DOLBY D EX) or DTS plus Dolby Digital EX (DTS + DD EX) processing (6.1-channel reproduction) to the software.

*3 When “EX/ES:OFF” is selected, “PLII MOVIE” and “PLII MUSIC” will be activated for 2-channel software. (See page 44.)

Notes:

•If you want to use “PLIIx MOVIE” or “PLIIx MUSIC” for analog sources or digital 2-channel software, select “EX/ES:AUTO,” “EX/ES:ON,” “PLIIx MOVIE,” or “PLIIx MUSIC” in this setting.

•When the Zone 2 speakers are activated or the surround speakers are set to “NONE,” you cannot activate this setting and “NO SURR SP” appears on the display.

English

45