JVC RX-8040B manual Connections 3 Video Cable Connection

English

CONNECTIONS 3: Video Cable Connection

This receiver is equipped with three types of the video terminals—S-video, composite video, and component video, and can output the signal through the output jack only the signal came from same type input jack. So you need to connect the VCR 1 and/or DVD player to the TV using one of the following three ways:

•When using the AV COMPU LINK remote control system, set the component video input for the VCR 1 (VCR connected to the VCR 1 jacks) and DVD player correctly (see “Setting the component video input” on page 38); otherwise, the correct input for this receiver will not be selected on the TV.

	When connecting the source equipment to the receiver through the S-video jacks, connect the receiver
	to the TV’s Video Input 1 jack (S-video input) using S-video cables.
CASE 1		Source		This receiver		TV
		Equipment	S-video cable		S-video cable
						To Video Input 1
	When connecting the source equipment to the receiver through the composite video jacks, connect
	the receiver to the TV’s Video Input 2 jack (composite video input) using composite video cables.
CASE 2
		Source		This receiver		TV
		Equipment
			Composite		Composite
			video cable		video cable	To Video Input 2
	When connecting the source equipment to the receiver through the component video jacks, connect
	the receiver to the TV’s Video Input 2 jack (component video input) using component video cables.
CASE 3
		Source		This receiver		TV
		Equipment	Component		Component
			video cable		video cable	To Video Input 2

The AV COMPU LINK remote control system allows you to use the five basic functions listed below.

Remote Control of the VCR, DVD player, and TV using This Remote Control

IMPORTANT:

To operate the video components using the IR signal transmitter (supplied), place it so that it is aimed at the remote sensor(s) on the target video component(s).

•The IR signal transmitter can send signals at a distance of 3 m.

DVD DVD player

TV VCR 1

This receiver

One-Touch Video Play

•Simply by inserting a video cassette without its safety tab into the VCR 1 (VCR connected to the VCR 1 jacks), you can watch the video playback without setting other switches manually.

The receiver automatically turns on and changes the Zone 1 source to “VCR 1.”

The TV automatically turns on and changes the input mode to the appropriate position so that you can view the playback picture. When you insert a video cassette with its safety tab in place, press the play (3) button on the VCR or on its remote control. Thus, you can get the same result.

–If the receiver is already turned on with the ZONE 2 indicator lights up and the source name for Zone 2 appears on the unit’s display, the receiver changes the Zone 2 source to “VCR 1.”

•When you press PLAY on the remote control supplied for this receiver for operating the VCR 1, the receiver automatically turns on and changes the Zone 1 source or Zone 2 source to

“VCR 1”—depending on ZONE 1/ZONE 2 selector setting on the remote control.

–For Zone 1 operations only: The TV automatically turns on and changes the input mode to the appropriate position so that you can view the playback picture.

You can control the connected video components using this remote control. Aim the remote control at the remote sensor(s) on the target video component(s) or on the receiver directly.

For details, see page 58.

Note:

To operate the video components from Zone 2, use the RF rod antenna and IR signal transmitter (see pages 14 and 15).

54