JVC RX-8040B manual Press and hold DVD Power Press DVD, Press CD

To change the transmittable signals for operating another manufacturer’s DVD player

To change the transmittable signals for operating another manufacturer’s CD player

1. Press and hold DVD POWER.

2. Press DVD.	DVD
	POWER

1.	Press and hold
	AUDIO POWER ON.
2.	Press CD.

AUDIO POWER

ON

3. Enter a manufacturer’s code using buttons 1–9, and 0.

See page 62 to find the code.

4.Release DVD POWER.

5.Try to operate your DVD player by pressing

DVD POWER.

When your DVD player turns on or off,

DVD

1 2 3

4 5 6

7/P 8 9

10 0 +10

RETURN

3. Enter a manufacturer’s code

using buttons 1–9, and 0.

See page 62 to find the code.

4.Release AUDIO POWER ON.

5.Try to operate your CD player by pressing one of the below buttons.

CD

1 2 3

4 5 6

7/P 8 9

10 0 +10

you have entered the correct code.

If more than one code is listed for

your brand of DVD player, try each one until the correct one is entered.

The following button can be used for operating the DVD player:

/ REW PLAY FF/

STOPPAUSE

ENTER

TOP

MENU

MENU

When your CD player operated	/ REW	PLAY	FF/
correctly, you have entered the correct		STOP	PAUSE
code.
• DO NOT forget to turn on the CD
player before pressing one of the
below buttons.

If more than one code is listed for your brand of CD player, try each one

DVD POWER : Turn on and off the

DVD player.

After pressing DVD or DVD MULTI, you can perform the following operations on the DVD player:

PLAY : Start playing.

4: Return to the beginning of the current (or

previous) chapter. Some model of the DVD player, rewind the picture.

¢: Skip to the beginning of the next chapter.

	Some model of the DVD player, fast-forward
	the picture.
STOP	: Stop playing.
PAUSE	: Pause playing. To resume, press PLAY.

1 – 10, 0, +10 : Select a track number directly. For track number 5, press 5.

For track number 15, press +10, then 5. For track number 20, press +10, then 10 (or press +10, +10, then 0).

For track number 30, press +10, +10, then 10 (or press +10, +10, +10, then 0).

Notes:

•Refer to the manual supplied for the DVD player.

•Some buttons listed above may not be used for some DVD players.

After pressing DVD or DVD MULTI,
these buttons can be used for the
DVD menu operations.	ENTER
TOP	MENU
MENU
Note:

For detailed menu operations, refer to the instructions supplied with the discs or the DVD player.

until the correct one is entered.

After pressing CD, you can perform the following operations on the CD player:

PLAY : Start playing.

4: Return to the beginning of the current (or

previous) track.

¢: Skip to the beginning of the next track.

STOP	: Stop playing.
PAUSE	: Pause playing. To resume, press PLAY.

1 – 10, +10 : Select a track number directly. For track number 5, press 5.

For track number 15, press +10, then 5. For track number 20, press +10, then 10.

For track number 30, press +10, +10, then 10.

Notes:

•Refer to the manual supplied for your CD player.

•Some buttons listed above may not be used for some CD players.

61