JVC RX-8040B manual DVD Multi

Models: RX-8040B

1 138
Download 138 pages 47.23 Kb
Page 93
Image 93

Selecting different sources for picture and sound

While watching pictures from a video source (DVD player, VCR, or DBS tuner), you can listen to sound of an audio source.

Once you have selected a video source, pictures of the selected source are sent to the TV until you select another video source.

Press one of the audio source selection buttons—PHONO, CD, TAPE/MD, CDR, FM, AM—while viewing the picture from a video component such as the VCR or DVD player, etc.

 

 

DVD

DVD MULTI

PHONO

CD

 

 

VCR 1

VCR 2

TAPE/MD

CDR

PHONO CD

CDR TAPE/MD FM

AM

 

FM

AM

 

 

TV/DBS VIDEO

On the front panel

 

On the remote

Adjusting the Zone 1 Volume

On the front panel:

To increase the volume, turn MASTER VOLUME clockwise. To decrease the volume, turn it counterclockwise.

On the remote control:

To increase the volume, press VOLUME +.

To decrease the volume, press VOLUME –.

Notes:

The volume level can be adjusted within the range of “0” (minimum) to “70” (maximum).

If you set “ONE TOUCH OPE” (One Touch Operation) to “ON” (see page 38), you do not have to adjust the volume level each time you change the source. It is automatically set to the stored level.

If you have turned off the receiver with the volume level set at more than level “30,” the volume level will be automatically set at level “30” next time you turn on the receiver.

CAUTIONS:

Always set the volume to the minimum before starting any source. If the volume is set at a high level, the sudden blast of sound energy can permanently damage your hearing and/or ruin your speakers.

Be careful not to turn up the volume too high when controlling the receiver without listening to the playback sound. For example, when adjusting the volume level in Zone 2 from Zone 1.

Activating the Zone 1 Front

Remote

Speakers

NOT

 

When shipped from the factory, both pairs of the front speakers have been set to be used in Zone 1.

To use the speakers connected to the FRONT2/ZONE2 SPEAKERS terminals, set the speaker usage correctly. (See “Setting the Zone 2/Speakers 2” on page 38.)

When you have connected two pairs of front speakers and placed them in Zone 1, you can select which to use.

To use the speakers connected to the FRONT1 SPEAKERS

terminals, press SPEAKERS ON/OFF 1 so that the SPEAKERS 1 indicator lights up on the display.

Make sure that the SPEAKERS 2 indicator is not lit.

To use the speakers connected to the FRONT2/ZONE2

SPEAKERS terminals, press SPEAKERS ON/OFF 2/ZONE 2 so that the SPEAKERS 2 indicator lights up on the display.

Make sure that the SPEAKERS 1 indicator is not lit.

To use both sets of the speakers connected to the FRONT1

SPEAKERS and FRONT2/ZONE2 SPEAKERS terminals, press SPEAKERS ON/OFF 1 and SPEAKERS ON/OFF 2/ZONE 2 so that the SPEAKERS 1/2 indicators light up on the display.

ANALOG

L

R LINEAR PCM

SPEAKERS 1 2

VOLUME

ZONE 1

Ex. When both sets of the speakers selected.

Note:

When you select DVD MULTI as the source or any one of the Surround/DSP mode which activates the center and/or surround speaker(s), you can use only one set of the speakers.

To use neither set of the speakers connected to the FRONT1

SPEAKERS and FRONT2/ZONE2 SPEAKERS terminals, press SPEAKERS ON/OFF 1 and SPEAKERS ON/OFF 2/ZONE 2 so that the SPEAKERS 1/2 indicators go off from the display.

Activating the speakers turns on the Surround and DSP modes previously selected.

Listening with headphones only:

Connect headphones to the PHONES jack, and deactivate both sets of the front speakers so that “HEADPHONE” appears and the HEADPHONE indicator lights up on the display.

You can listen to left and right channel sound with headphones.

Make sure that all the speaker indicators are not lit.

You can enjoy the sound effects through the headphones when Surround or DSP mode is activated—3D Headphone

(3D H PHONE) mode.

“3D H PHONE” appears and the DSP and HEADPHONE indicators light up on the display. (For details, see pages 47 and 48.)

Note:

3D Headphone (3D H PHONE) mode is not valid for DVD MULTI playback mode.

CAUTION:

Be sure to turn down the volume:

Before connecting or putting on headphones, as its high volume can damage both the headphones and your hearing.

Before turning on the speakers again, as its high volume may come out of the speakers.

English

21

Page 93
Image 93
JVC RX-8040B manual DVD Multi