JVC RX-8040B manual Activating the DSP Modes, Select and play any source excluding DVD Multi

All channel stereo mode

This mode can reproduce a larger stereo sound field using all the connected (and activated) speakers.

• If the surround speakers are set to “NONE,” you cannot select

“ALL STEREO.”

DVD		PHONO	CD
VCR 1	VCR 2	TAPE/MD	CDR
TV/DBS	VIDEO	FM	AM

DSP SURR / DSP

OFF

Sound reproduced from normal stereo

Sound reproduced from All Channel Stereo mode

Activating the DSP Modes

Activating one of the DSP modes for a source automatically recalls the memorized settings and adjustments (see pages 32 to 41).

You can also use the buttons on the remote control for the same functions.

IMPORTANT:

Check the following before or while using the buttons and controls.

For Zone 1 operations:

The ZONE 1 indicator lights up on the unit’s display.

•When using the unit:

–“ZONE2” is not shown in the unit’s main display.

•When using the remote control:

–Set the ZONE 1/ZONE 2 selector to ZONE 1.

–Check the indication shown on the remote’s display when you press a button—this indicates the remote control operation mode together with multi-room operation mode (either for ZONE 1 or ZONE 2) for about two hours.

AUDIO POWER

ZONE 1	ZONE 2	STANDBY	ON
ZONE 1	ZONE 2	TV/CATV/DBS	DVD

ON/OFF ON/OFF POWER POWER

ZONE 1

ZONE 1 ZONE 2

Ex. When you press DSP with ZONE 1/ZONE 2 selector set to ZONE 1.

1.Select and play any source excluding DVD MULTI.

•Make sure you have selected the analog or digital input mode correctly.

•DSP modes are not valid for DVD MULTI playback mode.

2.Press DSP repeatedly until the DSP mode you want appears on the display.

•Each time you press the button, the DSP modes change as follows:

	DIGITAL AUTO
L C	R LINEAR PCM
SUBWFR	DIGITAL	DSP	SPEAKERS 1
LS	RS		VOLUME
			ZONE 1

= HALL 1	= HALL 2	= LIVE CLUB
= DANCE CLUB = PAVILION		= ALL STEREO*1
= THEATER 1	= THEATER 2	= MONO FILM*2

=(Back to the beginning)

*1	When the surround speakers are set to “NONE,” you cannot
	select “ALL STEREO.”
*2	When multi-channel signals come in, you cannot select
	“MONO FILM.”

Note:

When the Zone 2 speakers are activated or the surround speakers are set to “NONE,” the 3D-PHONIC processing is applied to the DSP modes (the 3D-PHONIC indicator also lights up).

To adjust the effect level (except All Channel Stereo), see page

41.

To cancel the DSP modes

Press SURROUND/DSP OFF (or SURR/DSP OFF on the remote control).

	ANALOG
L	R	LINEAR PCM
SUBWFR		SPEAKERS 1

VOLUME

ZONE 1

49