JVC RX-8040B manual Connect the supplied FM antenna as temporary measure to

Getting Started

This section explains how to connect audio/video components and speakers to the receiver, and how to connect the power supply.

Do not connect the AC power cord until all other connections have been made.

Checking the Supplied Accessories AM antenna connections

English

Check to be sure you have all of the following items, which are supplied for the receiver.

The number in parentheses indicates the quantity of pieces supplied.

•Remote Control (1)

•Batteries (2)

•AM Loop Antenna (1)

•FM Antenna (1)

•RF Rod Antenna (1)

•IR Signal Transmitter (1)

•Double-sided Adhesive Tape (1)

If anything is missing, contact your dealer immediately.

Connecting the FM and AM Antennas

FM antenna connections

AB

75	75
FM	FM
COAXIAL	COAXIAL

Extend the supplied FM antenna horizontally.

Assemble the supplied AM loop antenna as follows:

Snap the tabs on the loop into the slots of the base to assemble the AM loop antenna.

		Turn the loop until you have
		the best reception.
	ANTENNA
	AM
	EXT
	AM
	LOOP
		AM Loop Antenna
	FM 75	(supplied)
	COAXIAL
1	2	3

ANTENNA

AM

EXT

FM 75

COAXIAL

FM Antenna (supplied)

AM

LOOP

Outdoor FM Antenna Cable (not supplied)

Outdoor single vinyl-covered wire (not supplied)

Notes:

Connect the supplied FM antenna as temporary measure to the	• If the AM loop antenna wire is covered with vinyl,
FM 75 Ω COAXIAL terminal—A	remove the vinyl by twisting it as illustrated.
	• Make sure the antenna conductors do not touch any
If reception is poor, connect the outdoor FM antenna (not	other terminals, connecting cords and power cord. This
	could cause poor reception.
supplied)—B
	• If reception is poor, connect an outdoor single vinyl-covered wire
1. Disconnect the supplied FM antenna.
	(not supplied) to the AM EXT terminal. (Keep the AM loop antenna
2. Connect a 75 Ω coaxial cable (with the standard type connector).
	connected.)

7