JVC RX-8040B manual Setting the component video input

English

Setting the component video input

When you use the component video inputs for connecting the DVD player and/or DBS tuner (or VCR), register the type of input jacks. If you have not selected appropriate video input jacks, the AV COMPU LINK remote control system cannot operate properly (see page 53) and you cannot see playback picture of those video components.

7For the DVD player—VIDEO IN DVD

Select one of the following:

VIDEO DVD: CMPNT Select when connecting the DVD

player to the component video input jacks.

VIDEO DVD: S/C Select when connecting the DVD player to the composite video or S-video input jacks.

7For the DBS tuner—VIDEO IN DBS

Select one of the following:

VIDEO DBS: CMPNT*1 Select when connecting the DBS

tuner to the component video input jacks.

VIDEO DBS: S/C Select when connecting the DBS tuner to the composite video or S-video input jacks.

Note:

*1 When you have selected this setting, you cannot select “VIDEO VCR1: CMPNT” for “VIDEO IN VCR1.” Then “VIDEO VCR1: S/C” is applied for “VIDEO IN VCR1” setting.

7For the VCR—VIDEO IN VCR1

Select one of the following:

VIDEO VCR1: CMPNT*2 Select when connecting the VCR 1

	to the component video input jacks.
VIDEO VCR1: S/C	Select when connecting the VCR 1
	to the composite video or S-video
	input jacks.

Note:

*2 When you have selected this setting, you cannot select “VIDEO DBS: CMPNT” for “VIDEO IN DBS.” Then “VIDEO DBS: S/C” is applied for “VIDEO IN DBS” setting.

Setting the Zone 2/Speakers 2

You can select the usage of the speaker connected to the FRONT2/ZONE2 SPEAKERS terminals.

7FRONT2/ZONE2 SPEAKERS terminal usage

—FRONT SPEAKER2

Select one of the following:

FRONT SPK2: SPK2 Select when connecting the second

Zone 1 front speakers.

FRONT SPK2: ZONE2 Select when connecting the Zone 2 front speakers.

Note:

When connecting the Zone 2 front speakers to the ZONE 2 PREOUT jacks through another amplifier (see “Connection Å” on page 16), no settings are required on this receiver.

Memorizing the volume level for each source

This unit memorizes some settings separately for each source (see page 25).

In addition, you can store the volume level for each source with the other memorized settings—One Touch Operation.

•This receiver memorizes the volume level—

–when you turn off the power,

–when you change the source,

–when you press ZONE 1 ON/OFF or ZONE 2 CONTROL, and

–when you change the source name.

7One Touch Operation—ONE TOUCH OPE

Select one of the following:

ONE TOUCH: ON Select to store the volume level

separately for each source. (The ONE TOUCH OPERATION indicator lights up on the display.)

ONE TOUCH: OFF Select this not to store the volume level.

To recall the volume level

With the ONE TOUCH OPERATION indicator lit, the volume level for the currently selected source is recalled when the source is selected.

To cancel the One Touch Operation

Set One Touch Operation to “ONE TOUCH: OFF” so that the ONE TOUCH OPERATION indicator goes off from the display.

Note:

If you have turned off the receiver with the volume level set at more than level “30,” the volume level will be automatically set at level “30” next time you turn on the receiver.

38