Setting up the NetWare Server
Configure the NetWare Server for printing with
REFERENCE
▼CONFIGURATION GUIDE
▼Chapter 2: Setting up Network Servers
➤
➤
Setting up TCP/IP
Configure the TCP/IP Setup options to assign the IP Address, Subnet Mask, and Gateway Address on the
REFERENCE
▼CONFIGURATION GUIDE
▼Chapter 4: Performing Setup from the Control Panel
▼Network Setup options
▼Protocol Setup options
➤TCP/IP Setup options
Setting up IPX/SPX (when using NetWare in IPX/SPX network)
Configure the IPX/SPX frame type for the
REFERENCE
▼CONFIGURATION GUIDE
▼Chapter 5: Setting up the
▼Network Setup
▼Protocols
➤IPX/SPX
Setting up the Printing Service
Enable the PServer Setup options and NDS Setup options (when using in NDS/NDPS mode), or Bindery Setup options (when using in Bindery mode) from Fiery WebSetup or Command WorkStation.
REFERENCE
▼CONFIGURATION GUIDE
▼Chapter 5: Setting up the
8