Toshiba setup guide Setup Flow for Windows, For SMB Printing, Connecting the GA-1120/GA-1130

Page 6

SETUP FLOW

After completing each procedure, please mark the checkbox ( ) in front of each procedure so that you can make sure completed each step for setup.

Setup Flow for Windows

For SMB Printing

Connecting the GA-1120/GA-1130

Connect the GA-1120/GA-1130 to your network with a network cable.

REFERENCE

▼CONFIGURATION GUIDE ▼Chapter 1: Connecting to the Network

➤Connecting network cable to the GA-1120/GA-1130

Setting up TCP/IP

Configure the TCP/IP Setup options to assign the IP Address, Subnet Mask, and Gateway Address on the GA-1120/GA-1130 to enable Fiery WebSetup from the Control Panel.

REFERENCE

▼CONFIGURATION GUIDE

▼Chapter 4: Performing Setup from the Control Panel

▼Network Setup options

▼Protocol Setup options

➤TCP/IP Setup options

Setting up the Printing Service

Configure the Windows Print Sharing to enable the Windows Printing Service from Fiery WebSetup or Command WorkStation.

REFERENCE

▼CONFIGURATION GUIDE

▼Chapter 5: Setting up the GA-1120/GA-1130 from a Windows Computer

▼Network Setup

➤Windows Print Sharing (SMB)

4

Image 6

Contents Easy Setup Guide FCC Notice For European models onlyPage Table of Contents Setup Flow Setting up TCP/IP Setup Flow for WindowsConnecting the GA-1120/GA-1130 Setting up the Printing ServiceInstalling the Printer Driver Configuring the OptionsFor LPR Printing For IPP Printing For Novell Printing Setting up the NetWare Server Setting up IPX/SPX when using NetWare in IPX/SPX networkNetwork Setup Services NetWare Printing PServer options Setup Flow for Macintosh Setting up AppleTalkWindows About the Installation Procedure System RequirementsInstalling the Printer Driver for SMB Printing When the GA-1120 is installedWhen the GA-1130 is installed Point-and-Print Installation Click on YesConfiguring the Options Non Point-and-Print Installtion RequirementClick on the Ports tab and click on Add Port Click on Close to close the screen Insert the CD-ROM into the CD-ROM drive 11Select the port that you create and click on Next Installing the Printer Driver for LPR Printing Windows NT RequirementsSelect LPR Port and click on New Port Click on Close to close the screen Click on OK to close the screen Select the port that you create and click on Next Windows 2000 and Windows XP Select Standard TCP/IP Port and click on New Port Select Custom and click on Settings Screen returns to the Add Printer Wizard screen Click on Close Click on Yes Configuring the Options Installing the Printer Driver for IPP Printing Click on Next Select Network printer and click on Next Click on OK Click on Have Disk Configuring the Options Installing the Printer Driver for Novell Printing Windows 95/98/Me Supplement Open screen appears Configuring the Options Windows NT 4.0/2000/XP Printer Driver Installing Configuring the Options Configuring the Options Configuring the Options ManuallyColor-MFP-ADU Click on OK to save settings Display the Device Settings tab and set the options Copier Type Configuring the Options Automatically Installing the Printer Driver Memory 32MB or more When the version of AdobePS is earlier than Installing the Printer Driver to MacintoshInstalling the AdobePS 8.7.2 Printer Driver When the version of AdobePS is later thanClick on OK Click on Restart Creating the AdobePS Printer Large Capacity Feeder Close the screen Click on OK Appendix for Booklet Printing on Macintosh Printing a Portrait BookletPrinting a Landscape Booklet When Printing from Microsoft Word ALL Rights Reserved

Related manuals

Manual 168 pages 48.4 Kb