Toshiba GA-1120 setup guide Select Custom and click on Settings

6 Enter the IP address of the GA-1120/GA-1130 printer in the “Printer Name or IP Address” field and click on [Next].

•When you use a WINS server, enter the print server name of the GA-1120/GA-1130 printer provided from the WINS server in the “Printer Name or IP Address” field.

•In the “Port Name” field, the port name is automatically entered according to the IP address or printer name entered in the “Printer Name or IP Address” field.

7	Select “Custom” and click on [Settings...].
	• The Configure Standard TCP/IP Port Monitor screen

appears.

8 Select “LPR” at the “Protocol” option, enter a queue name in the “Queue Name” field at the “LPR Settings” option, and then click on [OK].

•In the “Queue Name” field, you have to enter a queue name, direct, hold, or print, on the GA-1120/GA-1130 printer. Enter a queue depending on how you want to print.

direct - print jobs are sent straight to the printer without spooling.

hold - print jobs are held until users operate copying or moving them to the Print queue with the job management tools.

print - print jobs are spooled to the hard disk in the GA-1120/GA-1130 printer and printed out. Use this queue for general printing.

•You can also enable the LPR Byte Counting by checking on “LPR Byte Counting Enabled”.

(Windows) PRINTER DRIVER INSTALLING THE

29