Toshiba GA-1120 For LPR Printing, Installing the Printer Driver, Configuring the Options

Page 7

Installing the Printer Driver

Install the printer driver to use SMB printing.

REFERENCE

P.13 “Installing the Printer Driver for SMB Printing”

Configuring the Options

Configure the option settings on the printer driver.

REFERENCE

P.47 “CONFIGURING THE OPTIONS”

For LPR Printing

LPR Printing is only available for Windows NT 4.0, Windows 2000, and Windows XP.

Connecting the GA-1120/GA-1130

Connect the GA-1120/GA-1130 to your network with a network cable.

REFERENCE

CONFIGURATION GUIDE Chapter 1: Connecting to the Network

Connecting network cable to the GA-1120/GA-1130

Setting up TCP/IP

Configure the TCP/IP Setup options to assign the IP Address, Subnet Mask, and Gateway Address on the GA-1120/GA-1130 to enable Fiery WebSetup from the Control Panel.

REFERENCE

CONFIGURATION GUIDE

Chapter 4: Performing Setup from the Control Panel

Network Setup options

Protocol Setup options

TCP/IP Setup options

SETUP FLOW

5

Image 7
Contents Easy Setup Guide For European models only FCC NoticePage Table of Contents Setup Flow Setting up the Printing Service Setup Flow for WindowsConnecting the GA-1120/GA-1130 Setting up TCP/IPConfiguring the Options Installing the Printer DriverFor LPR Printing For IPP Printing For Novell Printing Setting up IPX/SPX when using NetWare in IPX/SPX network Setting up the NetWare ServerNetwork Setup Services NetWare Printing PServer options Setting up AppleTalk Setup Flow for MacintoshWindows System Requirements About the Installation ProcedureWhen the GA-1120 is installed Installing the Printer Driver for SMB PrintingWhen the GA-1130 is installed Click on Yes Point-and-Print InstallationConfiguring the Options Requirement Non Point-and-Print InstalltionClick on the Ports tab and click on Add Port Click on Close to close the screen Insert the CD-ROM into the CD-ROM drive 11Select the port that you create and click on Next Installing the Printer Driver for LPR Printing Requirements Windows NTSelect LPR Port and click on New Port Click on Close to close the screen Click on OK to close the screen Select the port that you create and click on Next Windows 2000 and Windows XP Select Standard TCP/IP Port and click on New Port Select Custom and click on Settings Screen returns to the Add Printer Wizard screen Click on Close Click on Yes Configuring the Options Installing the Printer Driver for IPP Printing Click on Next Select Network printer and click on Next Click on OK Click on Have Disk Configuring the Options Installing the Printer Driver for Novell Printing Windows 95/98/Me Supplement Open screen appears Configuring the Options Windows NT 4.0/2000/XP Printer Driver Installing Configuring the Options Configuring the Options Manually Configuring the OptionsColor-MFP-ADU Click on OK to save settings Display the Device Settings tab and set the options Copier Type Configuring the Options Automatically Installing the Printer Driver Memory 32MB or more When the version of AdobePS is later than Installing the Printer Driver to MacintoshInstalling the AdobePS 8.7.2 Printer Driver When the version of AdobePS is earlier thanClick on OK Click on Restart Creating the AdobePS Printer Large Capacity Feeder Close the screen Click on OK Printing a Portrait Booklet Appendix for Booklet Printing on MacintoshPrinting a Landscape Booklet When Printing from Microsoft Word ALL Rights Reserved
Related manuals
Manual 168 pages 48.4 Kb