Toshiba GA-1120 setup guide Configuring the Options Manually

Page 49

CONFIGURING THE OPTIONS

After you complete the installation of printer drivers, you should configure the option settings on the printer driver.

There are two methods to configure the options;

•When the GA-1120/GA-1130 printer and your computer is not connected in the TCP/IP network, you can configure the options manually.

P47 “Configuring the Options Manually”

•When the GA-1120/GA-1130 printer and your computer is connected in the TCP/IP network, you can configure the options automatically obtaining the settings using the Two-Way Communication.

P52 “Configuring the Options Automatically”

Configuring the Options Manually

The procedure to configure the options manually is different depending on the version of the Windows. P47 “Windows 95/98/Me”

P50 “Windows NT 4.0/2000/XP”

Windows 95/98/Me

1 Select the printer driver in the Printers folder. Then click on [File] and select [Properties].

•The printer driver properties screen appears.

(Windows)

PRINTER DRIVER

INSTALLING THE

47

Image 49

Contents Easy Setup Guide For European models only FCC NoticePage Table of Contents Setup Flow Connecting the GA-1120/GA-1130 Setup Flow for WindowsSetting up TCP/IP Setting up the Printing ServiceConfiguring the Options Installing the Printer DriverFor LPR Printing For IPP Printing For Novell Printing Setting up IPX/SPX when using NetWare in IPX/SPX network Setting up the NetWare ServerNetwork Setup Services NetWare Printing PServer options Setting up AppleTalk Setup Flow for MacintoshWindows System Requirements About the Installation ProcedureWhen the GA-1120 is installed Installing the Printer Driver for SMB PrintingWhen the GA-1130 is installed Click on Yes Point-and-Print InstallationConfiguring the Options Requirement Non Point-and-Print InstalltionClick on the Ports tab and click on Add Port Click on Close to close the screen Insert the CD-ROM into the CD-ROM drive 11Select the port that you create and click on Next Installing the Printer Driver for LPR Printing Requirements Windows NTSelect LPR Port and click on New Port Click on Close to close the screen Click on OK to close the screen Select the port that you create and click on Next Windows 2000 and Windows XP Select Standard TCP/IP Port and click on New Port Select Custom and click on Settings Screen returns to the Add Printer Wizard screen Click on Close Click on Yes Configuring the Options Installing the Printer Driver for IPP Printing Click on Next Select Network printer and click on Next Click on OK Click on Have Disk Configuring the Options Installing the Printer Driver for Novell Printing Windows 95/98/Me Supplement Open screen appears Configuring the Options Windows NT 4.0/2000/XP Printer Driver Installing Configuring the Options Configuring the Options Manually Configuring the OptionsColor-MFP-ADU Click on OK to save settings Display the Device Settings tab and set the options Copier Type Configuring the Options Automatically Installing the Printer Driver Memory 32MB or more Installing the AdobePS 8.7.2 Printer Driver Installing the Printer Driver to MacintoshWhen the version of AdobePS is earlier than When the version of AdobePS is later thanClick on OK Click on Restart Creating the AdobePS Printer Large Capacity Feeder Close the screen Click on OK Printing a Portrait Booklet Appendix for Booklet Printing on MacintoshPrinting a Landscape Booklet When Printing from Microsoft Word ALL Rights Reserved

Related manuals

Manual 168 pages 48.4 Kb