Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

with a safety alert symbol, indicates that minor personal injury can result if proper precautions are not taken.

CAUTION

without a safety alert symbol, indicates that property damage can result if proper precautions are not taken.

NOTICE

indicates that an unintended result or situation can occur if the corresponding information is not taken into account.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property damage.

Qualified Personnel

The device/system may only be set up and used in conjunction with this documentation. Commissioning and operation of a device/system may only be performed by qualified personnel. Within the context of the safety notes in this documentation qualified persons are defined as persons who are authorized to commission, ground and label devices, systems and circuits in accordance with established safety practices and standards.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems. The permissible ambient conditions must be adhered to. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of the Siemens AG. The remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the information in this publication is reviewed regularly and any necessary corrections are included in subsequent editions.

Siemens AG	A5E02414743-01	Copyright © Siemens AG 2009.
Industry Sector	Ⓟ 04/2009	Technical data subject to change

Postfach 48 48 90026 NÜRNBERG GERMANY

IPC427C specifications

The Siemens IPC427C is a robust and versatile industrial PC designed to meet the demands of various applications in manufacturing, automation, and process control. This advanced system is tailored for use in harsh environments and is renowned for its high reliability and performance. One of the key features of the IPC427C is its compact design, allowing seamless integration into existing setups without consuming excessive space. This makes it particularly suitable for environments where space is at a premium.

The IPC427C utilizes powerful Intel processors, providing the necessary computational power to handle complex tasks and data processing. The system supports a range of Intel Core and Xeon processors, ensuring that users can select the configuration that best meets their performance requirements. Additionally, the IPC427C is equipped with an impressive amount of RAM, capable of supporting high-speed memory modules that enhance overall system performance.

Storage options in the IPC427C include both solid-state drives (SSD) and traditional hard disk drives (HDD), catering to various data storage needs. The solid-state drives offer faster data access speeds and higher durability compared to HDDs, making them ideal for critical applications. Users can also benefit from the flexibility in expansion options, as the IPC427C features multiple slots for add-on cards, enabling additional functionalities such as enhanced graphics capabilities or specialized communication interfaces.

Connectivity is another strong point of the IPC427C. Equipped with multiple USB ports, Ethernet connections, and serial interfaces, the system allows seamless integration with various peripherals and networks. This connectivity facilitates real-time data acquisition and communication, essential for modern industrial environments. The IPC427C also supports various protocols and standards, enhancing its compatibility with existing systems and software.

In terms of durability, the IPC427C is designed to withstand extreme temperatures, vibrations, and dust, making it suitable for industrial applications. Its fanless design reduces the likelihood of mechanical failures while ensuring silent operation. With its robust build quality, the IEC527C can operate continuously in demanding conditions, making it a reliable choice for a wide range of industrial applications.

Overall, the Siemens IPC427C stands out as a powerful and flexible industrial PC, combining advanced technologies and robust construction to provide reliable performance in challenging environments. Whether used in factory automation, machine control, or data processing, the IPC427C delivers efficiency and resilience, making it an essential component of modern industrial systems.