Toshiba 4511, 3511 manual Remove the pulley, one-way clutch and 3 E-rings, Feed roller

(2)Remove the pulley, one-way clutch and 3 E-rings.

E-ring

Pulley

One-way clutch

E-ring

Pickup roller

(E-5) Feed roller

(1)Remove the clip and take off the feed roller in the direction of the arrow.

(E-6)Drawer tray-up sensor and Drawer empty sensor

(1)Disconnect the connector and release the latches, and then take off the drawer tray-up sensor.

(2)Disconnect the connector and release the latches, and then take off the drawer empty sensor.

(E-7) Drawer paper stock sensor

(1)Disconnect 1 connector.

(2)Release the latches and take off the drawer paper stock sensor.

	Fig. 10-441
Clip	Feed roller	One-way clutch
	Fig. 10-442

Drawer tray-up sensor	Latch
Drawer empty sensor
Fig. 10-443

Drawer paper stock

sensor

Fig. 10-444

10

November 2003 © TOSHIBA TEC 10 - 21 e-STUDIO3511/4511 PAPER FEEDING SYSTEM