3.Main Service Parts for Safety
•The breaker, door switch, fuse, thermostat, thermofuse, thermistor, etc. are particularly important for safety. Be sure to handle/install them properly. If these parts are shorted circuit and/or made their functions out, they may burn down, for instance, and may result in fatal accidents. Do not allow a short circuit to occur. Do not use the parts not recommended by Toshiba TEC Corporation.
4.Cautionary Labels
•During servicing, be sure to check the rating plate and the cautionary labels such as “Unplug the power cord during service”, “Hot area”, “Laser warning label” etc. to see if there is any dirt on their surface and whether they are properly stuck to the equipment.
5.Disposition of Consumable Parts, Packing Materials, Used batteries and
•Regarding the recovery and disposal of the equipment, supplies, consumable parts, packing materials, used batteries and
6.When parts are disassembled, reassembly is basically the reverse of disassembly unless otherwise noted in this manual or other related documents. Be careful not to reassemble small parts such as screws, washers, pins,
7.Basically, the machine should not be operated with any parts removed or disassembled.
8.Precautions Against Static Electricity
•The PC board must be stored in an
Caution: Before using the wristband, pull out the power cord plug of the equipment and make sure that there are no uninsulated charged objects in the vicinity.
Caution : Dispose of used batteries and
Attention : Se débarrasser de batteries et
Vorsicht : Entsorgung des gebrauchten Batterien und
der