Toshiba 3511, 4511 manual Disassembly and Replacement, Transfer belt unit

14

14.7 Disassembly and Replacement

[A] Transfer belt unit

Note: Wearing gloves is recommended to avoid direct touch by bare hands to the transfer belt surface.

(1)Take off the drum cleaner unit ( Chapter 11.7 [A]).

(2)Take off the receiving tray ( Chapter 2.5.1 [B]).

(3)Take off the tray back cover ( Chapter 2.5.1 [C]).

(4)Unlock the fixing lever on the rear side by rotating it.

(5)Unlock the fixing lever on the front side by sliding it.

(6)Remove 1 screw and take off the fixing lever on the front side.

(7) Disconnect 3 connectors.

Note: Make sure to connect each connector to the socket in the same color as that of the connector.

1

2

Fig. 14-701

1

2

Fig. 14-702

Fig. 14-703

e-STUDIO3511/4511 TRANSFER/TRANSPORT UNIT 14 - 6 November 2003 © TOSHIBA TEC