1BEFORE USING FAX
10.[INTERRUPT] button
Use this button to interrupt the copy job in process and perform another one. The interrupted job is resumed by your pressing this button again.
11.[JOB STATUS] button
Use this button to confirm the job status, printing status, and FAX transmission/reception sta- tus of a print job, scan job and FAX job. ( P.66 “Checking Transmission Result”)
12.[ACCESS] button
Use this button when the equipment is managed under the department management or the user management. If this button is pressed after copying, the next user needs to key in the department code or user information, otherwise the copier function cannot be used. For the department code or user management, see the User Functions Guide.
13.[ENERGY SAVER/SHUT DOWN] button
Use this button when you want to shut down the equipment or when you want the equipment to enter into the energy saving mode. When you press this button, the menu for the energy saving mode appears. Press the [SLEEP] button on this menu to enter into the energy sav- ing mode and press the [SHUTDOWN] button to shut down the equipment.
14.[FUNCTION CLEAR] button
When this button is pressed, all selected functions are cleared and returned to the default settings.
15.[STOP] button
Use this button to stop any scanning and copying operations in progress.
16.[START] button
Use this button to start copying, scanning and FAX operations.
17.[CLEAR] button
Use this button to correct numbers keyed in, such as the copy quantity.
18.ERROR lamp
This lamp lights when an error occurs and the equipment needs some actions to be taken.
19.[MONITOR/PAUSE] button
Use this button for
20.Digital keys
Use these keys to enter the telephone and Fax numbers, ID numbers and password.
21.Touch panel
Use this panel for the various settings of each function of the copier, scanner and FAX. This panel also indicates the status of the equipment, such as when you run out of paper or there is a paper jam.