Toshiba user manual Drive Connectors -SR-M8102, Audio

Page 15

DRIVE CONNECTORS –SR-M8102

Figure 1.SR-M8102 CD-R/CD-RW Drive Rear Panel - Connectors

Power

Power is supplied to your CD-R/RW drive by the connection with your computer's

Connector

+5V/+12V power cable to the power socket at the back of drive. One side of the plug has

 

chamfered edges, so the power connector fits only one way.

CAUTION: Severe damage to the Drive circuits may occur if power cable is plugged in upside-down with power ON.

Audio

Supplies Analog and Digital sound to your system.

Connectors

 

ATAPI

The SR-M8102 CD-R/RW drive is connected to your computer system through the ATAPI

Connector

connector.

13

Image 15
Contents CD-R/CD-RW Drive Contents Formats Compatibility Introduction SR-M8102Load/Unload Button Emergency Eject Hole Front Panel Loading TrayJumper Settings Setup SR-M8102Placing CD-R/CD-RW Drive inside your Computer Connecting CablesCompleting Installation Installing Power CableInserting a Disc Vertically Drive Operation Inserting a Disc HorizontallyEmergency Ejection Removing a DiscCD-RW Software Usage GuidelinesCleaning Media Using Emergency EjectSolution Troubleshooting SR-M8102 Performance Specifications -SR-M8102Power EnvironmentalPhysical Regulatory Audio Drive Connectors -SR-M8102Connector ConnectorsInterface Pin Assignments