Toshiba SR-M8102 user manual Front Panel Loading Tray, Load/Unload Button Emergency Eject Hole

Page 4

Front Panel

Loading

Tray

LED

Load/Unload Button

Emergency Eject Hole

Figure 1.SR-M8102 CD-R/RW Drive Front Panel

Load disc using tray.

The LED lights when the drive is operating

The Load/Unload button is used to open the disc tray so you can install or remove a disc.

The emergency eject hole is to be used only when the Loading Tray will not open when Eject button is pressed.

Image 4

Contents CD-R/CD-RW Drive Contents Introduction SR-M8102 Formats CompatibilityFront Panel Loading Tray Load/Unload Button Emergency Eject HoleSetup SR-M8102 Jumper SettingsConnecting Cables Placing CD-R/CD-RW Drive inside your ComputerInstalling Power Cable Completing InstallationDrive Operation Inserting a Disc Horizontally Inserting a Disc VerticallyRemoving a Disc CD-RW SoftwareUsage Guidelines Emergency EjectionUsing Emergency Eject Cleaning MediaTroubleshooting SR-M8102 SolutionSpecifications -SR-M8102 PerformanceEnvironmental PowerPhysical Regulatory Drive Connectors -SR-M8102 ConnectorConnectors AudioInterface Pin Assignments