Toshiba P32LSA owner manual Installation, Alc

Page 19

Installation

Wall hanging accessory is available when you hang the monitor on the wall. Please follow the process mentioned on page 20-22.

When you install the monitor on the ceiling or on the floor, please follow the process on page 23.

To a service technician

For safety, make sure the place has enough strength to hold the whole weight of the monitor and the frames (*1). If necessary, reinforce the place before installation.

At least two people are needed for installation. Be careful not to lose removed screws or parts.

Before starting installation, discuss well with customers about the position to install, and get their agreement. After installation, check the installation is correct and safe.

*1: About the material and the structure of the wall, ceiling and floor to install LCD monitor Where to install the LCD monitor

If the wall is made of thin plywood or plastered board, it cannot hold the weight.

The chart below shows adaptable anchors for each material. Please check well the structure and strength of the place to install, and choose the best method for safety.

Adaptable anchors / screws for each material

	Material	Anchor
	Plastered board	Impossible to install in Plastered board or Plywood board. Install in the tie beam instead of the wall.
	Plywood board
	Plywood board	Whole anchor or Bolt
	Concrete	Whole anchor or Bolt
	Block
	ALC	Tie lock anchor
	Mortar	Tie lock anchor
	Mortar
	Brick	Coach bolt (diameter: 6mm x length: 60mm)
	Wooden pillar	Coach bolt (diameter: 6mm x length: 60mm)

For assembly, a screwdriver with more than 300mm shaft is needed.

19

Image 19

Contents LCD Monitor Contents Example of figure Safety InstructionsDisregard may cause death or serious injury*1 Disregard may cause injury*2 or material damage*3If not, the unit may fall down and cause an injury Do not place the unit in a location subject to vibration Insert the power plug fully into a 100-240V AC outletDo not place objects on the unit Installation Do not install the unit where humidity is high Follow these precautions for the power cord and lugDo not insert objects inside the unit Do not block the ventilation holes on the unit Precautions for moving the unitNever insert or remove the power plug with wet hands Take measures to prevent the unit from falling downDo not climb or stand on the unit Precautions for the remote control batteriesDo not push or jolt the LCD panel Consult your dealer for internal cleaning once a year Cleaning Remove the power plug before cleaningOn disposal or handing over to a new owner On usageExemptions Varieties of terminals are available FeaturesHigh-resolution HD panel MVA system less-reflection black TFT LCD panelFront Names and Functions of Controls UnitSide Controls Back Option Names and Functions of Controls Remote controlAbout the remote control Battery InstallationEffective range Please check all are supplied Supplied AccessoriesYou can select Video input from 3 terminals below ConnectionYou can select RGB input from 2 terminals below Back Connecting the Power CordALC InstallationRemove the stand of the LCD monitor How to install the monitor on the wallUsing Supplied screws, fix the frame on the LCD monitor Mount the LCD monitor on the bracket Floor installation brace for LCD monitor Dimension Back Main power switch Power On/OffFunction of each button Menu FunctionMenu display chart Default Factory default settingInput signal Input SignalSymptom Check these things Guide to Simple Problem SolvingPage About trademarks Annex