Toshiba P32LSA How to install the monitor on the wall, Remove the stand of the LCD monitor

Page 20

How to install the monitor on the wall

In case of using option bracket (FPT-WA5)

1. Remove the stand of the LCD monitor

To avoid damage, spread blanket on the table to put the LCD monitor on.

To remove the stand of the LCD monitor, put the LCD monitor on the edge of the table, and remove the screws on the stand.

Described below is one example of how to install the unit on the wall. The wall hanging accessory will need to be manufactured according to the installation, so consult your dealer before the installation work.

2. Wall hanging accessory

Wall hanging accessory is available at the shop.

*: In the package, the bracket and the frame of wall hanging accessory are assembled. Please separate the bracket and the frame at first. After the bracket is fixed on the wall, fix the frame on the LCD monitor.

3. Remove the frame from the bracket

Hold the lower part of the frame and raise it up to remove from the bracket.

4. Fix the bracket on the wall

Fix the bracket on the wall firmly with anchors or screws (not supplied).

Make sure anchors or screws are stable.

(Choose appropriate anchors or screws depending on the structure and material of the wall.)

Refer to the chart on page 19 to check the condition of the wall, and choose the safe and appropriate way for installation.

20

Image 20

Contents LCD Monitor Contents Safety Instructions Disregard may cause death or serious injury*1Disregard may cause injury*2 or material damage*3 Example of figureIf not, the unit may fall down and cause an injury Do not place objects on the unit Insert the power plug fully into a 100-240V AC outletDo not place the unit in a location subject to vibration Do not insert objects inside the unit Follow these precautions for the power cord and lugInstallation Do not install the unit where humidity is high Precautions for moving the unit Never insert or remove the power plug with wet handsTake measures to prevent the unit from falling down Do not block the ventilation holes on the unitDo not push or jolt the LCD panel Precautions for the remote control batteriesDo not climb or stand on the unit Cleaning Remove the power plug before cleaning Consult your dealer for internal cleaning once a yearExemptions On usageOn disposal or handing over to a new owner Features High-resolution HD panelMVA system less-reflection black TFT LCD panel Varieties of terminals are availableSide Controls Names and Functions of Controls UnitFront Back Names and Functions of Controls Remote control OptionEffective range Battery InstallationAbout the remote control Supplied Accessories Please check all are suppliedYou can select RGB input from 2 terminals below ConnectionYou can select Video input from 3 terminals below Connecting the Power Cord BackInstallation ALCHow to install the monitor on the wall Remove the stand of the LCD monitorUsing Supplied screws, fix the frame on the LCD monitor Mount the LCD monitor on the bracket Floor installation brace for LCD monitor Dimension Back Power On/Off Main power switchMenu Function Function of each buttonMenu display chart Factory default setting DefaultInput Signal Input signalGuide to Simple Problem Solving Symptom Check these thingsPage Annex About trademarks