Toshiba P32LSA owner manual Follow these precautions for the power cord and lug

Page 6

Follow these precautions for the power cord and lug.

Do not damage, modify such as by extending, or heat (such as by pressing near heating equipment).

Do not pull, place heavy objects or pinch. Do not bend, twist or bunch up.

Fire or electric shock may result.

Do not insert objects inside the unit.

If metallic materials or combustibles such as paper get inside the unit from ventilation holes and other places, it may cause a fire or an electric shock.

Be especially careful that children do not insert objects in the unit.

If there is thunder or lightning, do not touch the unit or the power plug.

You may suffer an electric shock.

Cleaning

If dust has collected on the power plug connectors, remove the plug from the outlet and clean off the dust.

This dust may cause a fire due to reduced insulation of the plug.

Caution

Installation

Do not install the unit where humidity is high.

If the unit is installed in direct sunlight, a closed car or near a stove, it may cause overheating or electric shock. Also the cabinet or other parts may distort or be damaged, and electric shock may result.

Do not install the unit where it is exposed to humidity, oil, smoke or excessive dust.

If the unit is installed next to a humidistat, a stove or in a location where there is a large quantity of dust, it may cause a fire or electric shock.

6

Image 6
Contents LCD Monitor Contents Disregard may cause injury*2 or material damage*3 Safety Instructions Disregard may cause death or serious injury*1 Example of figureIf not, the unit may fall down and cause an injury Insert the power plug fully into a 100-240V AC outlet Do not place the unit in a location subject to vibrationDo not place objects on the unit Follow these precautions for the power cord and lug Installation Do not install the unit where humidity is highDo not insert objects inside the unit Take measures to prevent the unit from falling down Precautions for moving the unitNever insert or remove the power plug with wet hands Do not block the ventilation holes on the unitPrecautions for the remote control batteries Do not climb or stand on the unitDo not push or jolt the LCD panel Cleaning Remove the power plug before cleaning Consult your dealer for internal cleaning once a yearOn usage On disposal or handing over to a new ownerExemptions MVA system less-reflection black TFT LCD panel FeaturesHigh-resolution HD panel Varieties of terminals are availableNames and Functions of Controls Unit FrontSide Controls Back Names and Functions of Controls Remote control OptionBattery Installation About the remote controlEffective range Supplied Accessories Please check all are suppliedConnection You can select Video input from 3 terminals belowYou can select RGB input from 2 terminals below Connecting the Power Cord BackInstallation ALCHow to install the monitor on the wall Remove the stand of the LCD monitorUsing Supplied screws, fix the frame on the LCD monitor Mount the LCD monitor on the bracket Floor installation brace for LCD monitor Dimension Back Power On/Off Main power switchMenu Function Function of each buttonMenu display chart Factory default setting DefaultInput Signal Input signalGuide to Simple Problem Solving Symptom Check these thingsPage Annex About trademarks