Toshiba P32LSA owner manual Floor installation brace for LCD monitor

Page 23

How to install the LCD monitor on the floor 1. Remove the stand of the LCD monitor

To avoid damage, spread blanket on the table to put the LCD monitor on.

To remove the stand of the LCD monitor, put the LCD monitor on the edge of the table, and remove the screws on the stand.

2. Floor installation brace for LCD monitor

The floor installation brace will be manufactured according to the installation.

Before the installation work, please consult your dealer for the floor installation brace.

3. Fixing the floor installation brace to the floor

Fix the brace to the floor firmly with anchors or screws (not supplied).

Refer to the chart on page 19 to check the installation conditions, and choose a safe and appropriate way to install.

4. Wiring and mounting of the LCD monitor

For wiring details, refer to pages 17 – 18.

Raise the LCD monitor and fix it to the floor installation brace with screws.

At least two people are needed for this work.

How to install the LCD monitor to the ceiling 1. Remove the stand of the LCD monitor

To avoid damage, spread blanket on the table to put the LCD monitor on.

To remove the stand of the LCD monitor, put the LCD monitor on the edge of the table, and remove the screws on the stand.

2. Ceiling installing bracket for LCD monitor

The ceiling installing bracket will be manufactured according to the installation.

Before the installation work, please consult your dealer for the ceiling installing bracket.

3. Fixing the ceiling installing bracket on the ceiling

Fix the bracket on the ceiling firmly with anchors or screws (not supplied).

Refer to the chart on page 19 to check the installation conditions, and choose a safe and appropriate way to install.

4.Wiring and mounting of the LCD monitor

For wiring details, refer to pages 17 – 18.

Raise the LCD monitor and fix it on the ceiling installing bracket with screws.

At least two people are needed for this work.

23

Image 23

Contents LCD Monitor Contents Example of figure Safety InstructionsDisregard may cause death or serious injury*1 Disregard may cause injury*2 or material damage*3If not, the unit may fall down and cause an injury Do not place objects on the unit Insert the power plug fully into a 100-240V AC outletDo not place the unit in a location subject to vibration Do not insert objects inside the unit Follow these precautions for the power cord and lugInstallation Do not install the unit where humidity is high Do not block the ventilation holes on the unit Precautions for moving the unitNever insert or remove the power plug with wet hands Take measures to prevent the unit from falling downDo not push or jolt the LCD panel Precautions for the remote control batteriesDo not climb or stand on the unit Consult your dealer for internal cleaning once a year Cleaning Remove the power plug before cleaningExemptions On usageOn disposal or handing over to a new owner Varieties of terminals are available FeaturesHigh-resolution HD panel MVA system less-reflection black TFT LCD panelSide Controls Names and Functions of Controls UnitFront Back Option Names and Functions of Controls Remote controlEffective range Battery InstallationAbout the remote control Please check all are supplied Supplied AccessoriesYou can select RGB input from 2 terminals below ConnectionYou can select Video input from 3 terminals below Back Connecting the Power CordALC InstallationRemove the stand of the LCD monitor How to install the monitor on the wallUsing Supplied screws, fix the frame on the LCD monitor Mount the LCD monitor on the bracket Floor installation brace for LCD monitor Dimension Back Main power switch Power On/OffFunction of each button Menu FunctionMenu display chart Default Factory default settingInput signal Input SignalSymptom Check these things Guide to Simple Problem SolvingPage About trademarks Annex