Toshiba P32LSA owner manual Take measures to prevent the unit from falling down

Page 7

Take measures to prevent the unit from falling down.

If not, the unit may fall down and cause injury.

Do not block the ventilation holes on the unit.

The inside of the unit will overheat if the ventilation holes are sealed, which may result in a fire.

When installing the unit near a wall, keep the unit at least 10 cm from the wall.

Do not place the unit in a closet or bookshelf where ventilation is poor.

Do not spread a newspaper, tablecloth or curtain over the unit.

Do not place the unit on an unstable surface, such as a rug, or a cushion, etc.

Do not place the unit so that it is facing up or down, or on its side.

Precautions for moving the unit:

When moving the unit, be sure to remove the plug from the wall outlet and disconnect wiring cables between equipment and detach any securing anchors. If not, fire or electric shock may result if the power cord is damaged, injury may occur by the unit falling down.

When unpacking or carrying the unit, at least two people are needed. Make sure the units upright,

Do not carry the unit with the screen facing up or down.

Handle the unit so as not to jolt the unit.

Do not overload outlets or cables beyond their capacity.

Do not use extension cords.

Electric shock or fire may result.

Use

Do not pull the power cord when removing the plug from the wall outlet.

If the power cord is yanked, the cord may become damaged and fire or electric shock may occur. Always hold the plug firmly when removing it.

Never insert or remove the power plug with wet hands.

This may cause electric shock.

7

Image 7
Contents LCD Monitor Contents Example of figure Safety InstructionsDisregard may cause death or serious injury*1 Disregard may cause injury*2 or material damage*3 If not, the unit may fall down and cause an injury Do not place the unit in a location subject to vibration Insert the power plug fully into a 100-240V AC outletDo not place objects on the unit Installation Do not install the unit where humidity is high Follow these precautions for the power cord and lugDo not insert objects inside the unit Do not block the ventilation holes on the unit Precautions for moving the unitNever insert or remove the power plug with wet hands Take measures to prevent the unit from falling downDo not climb or stand on the unit Precautions for the remote control batteriesDo not push or jolt the LCD panel Consult your dealer for internal cleaning once a year Cleaning Remove the power plug before cleaningOn disposal or handing over to a new owner On usageExemptions Varieties of terminals are available FeaturesHigh-resolution HD panel MVA system less-reflection black TFT LCD panelFront Names and Functions of Controls UnitSide Controls Back Option Names and Functions of Controls Remote controlAbout the remote control Battery InstallationEffective range Please check all are supplied Supplied AccessoriesYou can select Video input from 3 terminals below ConnectionYou can select RGB input from 2 terminals below Back Connecting the Power CordALC InstallationRemove the stand of the LCD monitor How to install the monitor on the wallUsing Supplied screws, fix the frame on the LCD monitor Mount the LCD monitor on the bracket Floor installation brace for LCD monitor Dimension Back Main power switch Power On/OffFunction of each button Menu FunctionMenu display chart Default Factory default settingInput signal Input SignalSymptom Check these things Guide to Simple Problem SolvingPage About trademarks Annex