Removing the WiFi-Switch Board
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove:
a.SD Card
b.ExpressCard
c.battery
d.keyboard
e.
f.base cover
g.base corner caps
h.palmrest assembly
3.Perform the following steps as shown in the illustration:
a.Disconnect the cable from the system board.
b.Remove the screw that secures the
Installing the WiFi-Switch Board
1.Place the
2.Tighten the screw to secure the
3.Connect the cable to the system board.
4.Install:
a.palmrest assembly
b.base cover
c.base corner caps
d.
e.keyboard
f.battery
g.ExpressCard
h.SD Card
5.Follow the procedures in After Working Inside Your Computer.
31